W-JET Road Dryer Systems

Our Road Dryer Systems, configured with our W-JET M1 Jet power module, replace old compressor and LPG gas technique by an easily handled JET turbine running on DIESEL added 12% additive to ensure smooth operation - in all weather conditions.

 

Our Road Dryer Systems reduce:

Waiting times due to bad weather.

Transport and handling of dangerous goods.

Work time in traffic, hence traffic congestion.

...Our systems also remove moisture and road dirt from the surface to ensure strong adhesion before marking.

...Additionally, and easy and logic operator panel prevents errors.

The system, developed for drying roads without handling and storing dangerous LPG gas, is ideal also for drying and cleaning airport runways, crack sealing and weed control, etc.

Professional SEO services

W-JET dries out moisture, dust and dirt and by the suns UV light worn-out debris from surface, to ensure strong adhesion for new surfacing. The M1 easy handled automatic operator panel will prevent mishaps, and the strong reliable M1 jet turbine inside sealed stainless casing of just L/W/H 35x25x25 cm and 45 kg, will deliver same capacity as a 1,5 ton heavy diesel compressor and lot of LPG Gas.

The W-JET dryers are available as self-propelled 2 or 4WD tractors, and a wide range of exhaust system is available for roadmarking, crack sealing, surface cleaning, weed control etc.

Specification:

M1 Effect, variable: From 8 to 65 m³/minute
Fuel consume: From 7 to 30 ltr/hour
Capacity: 1500 – 3000 m²/hour
Noise @1 m distance: Max. 102 dB

WASP: L/W/H, KG: 200/75/98 cm, 95 kg (incl. 30 kg fuel)
WAS4: L/W/H, KG: 295/85/148 cm, 340 kg (incl. 55 kg fuel)
WAT4: L/W/H, KG: 335/110/260 cm, 1160 kg (incl. 105 kg fuel)

The “M1” Jet Module

The W-JET PowerPack M1

Contains:
1) W-JET Turbine.
2) Fuel, valves and pump panel.
3) ECU (Electronic Control Unit)
4) Air and Fuel sensor system.
5) Several AIR connect options.
6) Exhaust nozzle adapter.

The W-JET “M1” module is designed for mounting on suitable vehicles or machines, capable of the to supply of fuel and electric power.

M1 Service: remove the four 8 mm nuts, pack it and send it to us.

Service, Warranty and Certification

W-JET Service

First service/inspection after 80 hours, thereafter for each 160 hours or once per year, depending on which comes first.

After each service we provide 1-year warranty on the jet turbine. The purpose of our Service System is to avoid downtime on the road because of turbine failure, therefore, at each service vital turbine parts may be renewed or changed.

Warranty

1 year warranty if all W-JET maintenance and service instructions are conducted and equipment only is operated by W-JET instructed operators trained and certified by W-JET supervisor.

Certification

One-day training with certification of W-JET supervisor included at delivery.

24h. Customer Support

In the event of a technical question or problems, W-JET Service is there to help you 24h. Our Service hotline will respond to your call and arrange for rapid, w-jet assistance.